1 Reply Latest reply on Aug 27, 2018 5:54 PM by ShengY_96

    CYW20719 BT/EDR Disconnect

    mora_2248876

      Hi,

       

      I am using the CYW20719 in dual BLE and BT/EDR modes, i am building upon the HCI_IAP2_SPP example application . I would like to know if there is a possibility to disconnect the BT/EDR link on demand.

       

      I saw that there are functions to disconnect the SPP, iAP2 and GATT connection, but the device is still connected in BT/EDR to the phone i am testing with. Is there an easy way to create this complete disconnection?

       

      Thank you,

      Mo

        • 1. Re: CYW20719 BT/EDR Disconnect
          ShengY_96

          Q: I saw that there are functions to disconnect the SPP, iAP2 and GATT connection, but the device is still connected in BT/EDR to the phone i am testing with. Is there an easy way to create this complete disconnection?

          A: Could you please share the phenomenon of "the device is still connected in BT/EDR to the phone"? Per my understanding, take Android phone connect to SPP device for example: Android phone exchange the link key with SPP device firstly, then open the RFCOM for SPP connection. After SPP disconnected, Android phone do not have BT link with SPP device. Android phone only keep SPP device in paired device list.   BLE_GATT is share different link compare to BT.

           

          Regards

          Jenson

          1 of 1 people found this helpful