3 Replies Latest reply on Feb 8, 2015 7:31 PM by SeyhanA_31

    openocd failed after WICED IDE 3.1.0 installation

      Hello,

       

      I'm new to WICED IDE programming, i installed the WICDE IDE and 3.1.0 SDK.

      Building the snip.scan BM943362WCD4 is ok.

       

      but to start debugging and (extern) run the project.

      I get

       

      Downloading Bootloader ...

      "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

       

      FTDI drivers are installed. this is a windows 7 64 bit computer.

      openocd-all-brcm-libftdi.exe is in de sdk.

       

      in openocd_log.txt i get the following.

       

      Open On-Chip Debugger 0.8.0-dev-00139-g4dfe8d5-dirty (2013-08-22-12:22)

      Licensed under GNU GPL v2

      For bug reports, read

        http://openocd.sourceforge.net/doc/doxygen/bugs.html

      Info : only one transport option; autoselect 'jtag'

      trst_and_srst separate srst_nogate trst_push_pull srst_push_pull connect_assert_srst

      adapter speed: 1000 kHz

      adapter_nsrst_delay: 100

      jtag_ntrst_delay: 100

      Warn : target name is deprecated use: 'cortex_m'

      jtag_init

      Error: unable to open ftdi device: device not found

      Runtime Error: ./tools/OpenOCD/stm32f2x-flash-app.cfg:10:

      in procedure 'script'

      at file "embedded:startup.tcl", line 58

      in procedure 'init' called at file "./tools/OpenOCD/stm32f2x-flash-app.cfg", line 10