5 Replies Latest reply on Aug 27, 2018 3:33 AM by rajivv_36

    PSoC Creator 4.2 and M-Series Pioneer Kit CY8CKIT-044 "Pin guidance unavailable: 'Pin_Blue(0)' cannot be placed at P6[5]." P6[5] is the correct pin, how do I clear this error?


      I've been working with PSoC Creator and the M-Series Pioneer Kit CY8CKIT-044 and the PSoC 101 lessons. So far, so good, but consistently receive the error message "Pin guidance unavailable: 'Pin_Blue(0)' cannot be placed at P6[5]." when I try to use the blue LED on the board. I am confident that pin 6[5] is correct (it's even written on the Pioneer board silkscreen).


      Perhaps I have the wrong board config in Creator. CY8CKIT046SetupOnlyPackage_RevSA is currently installed. I haven't been able to find an installer that is specific to the CY8CKIT-044 on the Cypress Web site.


      Thanks in advance for your help,