3 Replies Latest reply on Aug 12, 2018 11:23 PM by user_377217153

    Regarding “guard sensor thickness” of capsense design guide.

    matsubara-y_1534086

      Hello Cypress.

       

      Below is description of MBR3 design guide.

      Document explains that recommended guard sensor thickness is 2mm.

       

       

      Which part of guard sensor does this description explain?

      Does this “thickness” define actual trace thickness(“A” of below figure)?

       

      Or does this “thickness” define width length of guard sensor(“B” of below figure)?

       

       

      Best Regards.

      Yutaka Matsubara