- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi support,
I have a project using CY7C65631 as a HUB USB 4 ports. Currently, I am using PWR# pins to enable external USB power switch. I already checked on the CY7C65631 datasheet but I do not know the PWR# pin status when the HUB USB power off.
Could you please help us on this case?
Thanks,
Ty
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Ty,
- The default state of the PWR# pin of the CY6C65631 is floating (Z). This is mentioned in the datasheet in table 3.
- When the hub is powered OFF, the PWR# pin remains floating and will not be driving LOW on the output line.
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Ty,
- The default state of the PWR# pin of the CY6C65631 is floating (Z). This is mentioned in the datasheet in table 3.
- When the hub is powered OFF, the PWR# pin remains floating and will not be driving LOW on the output line.
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Srinath,
Thank you so much for your support
Regards,
Ty