I use a CY84247AZI-M485 for a LIN-Master application with SCB V4.0.
"LIN" is the Name of the UART.
This is from an older diskussion:
>However, you could use a UART component and write firmware source code as per LIN master.
>Please make sure that you set LIN_MODE in SCBx_UART_RX_CTRL register.
>You can refer to http://www.cypress.com/file/175726/download.
So how can I enable the LIN_Mode?
You can write '1' to the 'bit 12' of SCBx_UART_RX_CTRL to enable LIN_MODE.
You can refer to PSoC4 System Reference Guide (PSoC Creator-> Help), in order to check for register write/read APIs.