3 Replies Latest reply on Jul 24, 2018 3:45 AM by rajivv_36

    Is it possible to use CapSense_ADC to measure the DieTemp?




      Using PSoC Creator 4.2 schematic designer, there doesn't seem to be a way to connect the DieTemp output connection to a CapSense_ADC input connection, as the CapSense_ADC component doesn't expose any connections in the schematic designer.


      It looks as if the CapSense_ADC inputs can only be connected to external pins and not to internal connections.


      Therefore, should I connect the DieTemp output to an external pin and then to the CapSense_ADC input pin (possibly the same pin) or is there a better solution?