Detected SiliconID: "FF FF 13 A1" is not in database

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

I am using PSoC 4 MCU "CY8C4247AZI-M485", Now when i try to program my MCU with miniprog3's 5 Pin connector, it gives me an error saying this. " Detected SiliconID: "FF FF 13 A1" is not in database ", Please help me in resoving this issue.

0 Likes
1 Solution
Vasanth
Moderator
Moderator
Moderator
250 sign-ins 500 solutions authored First question asked

Hi Chandresh,

Could you please make sure all the power connections are proper. Please use the following document http://www.cypress.com/file/141176/download  power supply section. Normally this will happen when connection to VCCD pin is not properly given. The voltage to that pins should be between 1.71-1.89V.

Best Regards,
VSRS

View solution in original post

0 Likes
1 Reply
Vasanth
Moderator
Moderator
Moderator
250 sign-ins 500 solutions authored First question asked

Hi Chandresh,

Could you please make sure all the power connections are proper. Please use the following document http://www.cypress.com/file/141176/download  power supply section. Normally this will happen when connection to VCCD pin is not properly given. The voltage to that pins should be between 1.71-1.89V.

Best Regards,
VSRS

0 Likes