In the PSoC Creator right click on project go to "Add" and click on "Existing Item..." where you can select folder (in which the libraries are stored) and then add your libraries to the project.
I have been tried more then two weeks. Attached pls find the project. During compilation it has error.
The temporary solution, we use PSOC3 for our main application and Adruino Mega use to interface the Nextion touch screen display. The communication between Adruino we are using RX/TX. This incur cost, we knew that just PSCO3 can do the work without using Adruino. Due to limitation of Adruino, we prefer to use PSOC as single chip solution.
The main issue we don't know how to port the libraries to PSOC 3 and make it works.
How you can use thattached files to add/modify and make it works.Regards,
Can you help to create a project and add in the libraries to PSOC 3? We tried till now nothing is working.
Appreciate for your help.
The HMI library can be ported to PSoC3 or PSoC5LP using considerable resources, which are beyond the scope of this community. Also C++ is not officially supported on PSoC Creator.
Hence, I request you to contact one of our design partners for your project requirement. You can find more information here.
We are extremely sorry to redirect you.
Thanks, and regards,