5 Replies Latest reply on Jul 24, 2018 12:53 AM by ueda-r_2674311

    Main loop stuck when BLESS DEEPSLEEP and WDT are used at the same time.

    ueda-r_2674311

      Hello.

      I am using CYBLE 212011-01 and made project that use BLESS DEEPSLEEP power mode while advertising, and interrupt by WDT every 100ms.

      After few seconds since started this program, main loop is stuck but the WDT fired every 100ms and the  main loop never recovered.

      There aren't any problems if I use BLESS SLEEP power mode and ACTIVE with WDT.

       

      Can anyone help me to solve this problem?

      Best regards.

      blesstest_uart.jpg