1 Reply Latest reply on Jul 19, 2018 1:41 AM by grsr

    "snip.scan-BCM943362WCD4-FreeRTOS-LwIP-SDIO-iar IAR=1" Fails

    suresh.gautam_3385211

      Hi,

       

      We want this make command to work as per client requirement : snip.scan-MurataType1LD-FreeRTOS-LwIP-SDIO-iar IAR=1.

      But we are getting compilation error (related to FreeRtos)after replacing all the required platform files.Also the already provided example make command "snip.scan-BCM943362WCD4-FreeRTOS-LwIP-SDIO-iar IAR=1" fails similarly.I tried on both the latest versions WICED-Studio-6.1 and WICED-Studio-6.2.

      Build error logs attached for both cases.

       

      Thanks and Regards,

      Suresh

       

      *******************************************************************************************************************************************

      Build error for snip.scan-BCM943362WCD4-FreeRTOS-LwIP-SDIO-iar IAR=1

      *******************************************************************************************************************************************

       

      12:22:03 **** Build of configuration Default for project 43xxx_Wi-Fi ****

      "C:\\Users\\20118776\\Documents\\WICED-Studio-6.2\\43xxx_Wi-Fi\\make.exe" snip.scan-BCM943362WCD4-FreeRTOS-LwIP-SDIO-iar IAR=1

      MAKEFILE MAKECMDGOALS=snip.scan-BCM943362WCD4-FreeRTOS-LwIP-SDIO-iar OTA2_SUPPORT is disabled

      Building with IAR toolchain...

      Making config file for first time

      +-----------------------------------------------------------------------------------------------------+

      | IMPORTANT NOTES                                                                                     |

      +-----------------------------------------------------------------------------------------------------+

      | Wi-Fi MAC Address                                                                                   |

      |    The target Wi-Fi MAC address is defined in <WICED-SDK>/generated_mac_address.txt                 |

      |    Ensure each target device has a unique address.                                                  |

      +-----------------------------------------------------------------------------------------------------+

      | MCU & Wi-Fi Power Save                                                                              |

      |    It is *critical* that applications using WICED Powersave API functions connect an accurate 32kHz |

      |    reference clock to the sleep clock input pin of the WLAN chip. Please read the WICED Powersave   |

      |    Application Note located in the documentation directory if you plan to use powersave features.   |

      +-----------------------------------------------------------------------------------------------------+

      +-----------------------------------------------------------------------------------------------------+

      | IMPORTANT NOTES                                                                                     |

      +-----------------------------------------------------------------------------------------------------+

      | Wi-Fi MAC Address                                                                                   |

      |    The target Wi-Fi MAC address is defined in <WICED-SDK>/generated_mac_address.txt                 |

      |    Ensure each target device has a unique address.                                                  |

      +-----------------------------------------------------------------------------------------------------+

      | MCU & Wi-Fi Power Save                                                                              |

      |    It is *critical* that applications using WICED Powersave API functions connect an accurate 32kHz |

      |    reference clock to the sleep clock input pin of the WLAN chip. Please read the WICED Powersave   |

      |    Application Note located in the documentation directory if you plan to use powersave features.   |

      +-----------------------------------------------------------------------------------------------------+

      MAKEFILE MAKECMDGOALS=snip.scan-BCM943362WCD4-FreeRTOS-LwIP-SDIO-iar OTA2_SUPPORT is disabled

      Building with IAR toolchain...

      Building Bootloader

       

       

        typedef platform_8021as_time_t                  wiced_8021as_time_t;            /**< 802.1AS time */

                ^

      "C:\Users\20118776\Documents\WICED-Studio-6.2\43xxx_Wi-Fi\include\wiced_platform.h",125  Error[Pe020]:

                identifier "platform_8021as_time_t" is undefined

      make.exe[3]: *** [build/waf.bootloader-NoOS-BCM943362WCD4/Modules/platforms/BCM943362WCD4/platform.o] Error 2

      make.exe[2]: *** [main_app] Error 2

      tools/makefiles/standard_platform_targets.mk:90: recipe for target 'bootloader' failed

      make.exe[1]: *** [bootloader] Error 2

      Makefile:351: recipe for target 'main_app' failed

      make: *** [main_app] Error 2

       

       

      12:22:11 Build Finished (took 7s.590ms)