9 Replies Latest reply on Jul 31, 2018 4:10 PM by MiRo_263836

    PSoC 4 CapSense Tuner - There was an error reading data from the device

      I am using PSoC creator with CY8C4024LQI-S411 and two capsense buttons. I based my code off of example code and changed it to match my pinout. I am unable to connect to the tuner application and keep getting "There was an error reading data from the device." I have made sure that the EZI2C scl, sda pins are going to the right place, matched the config parameters for the tuner and EZI2C, read countless discussion threads from people with the same problem, all with no luck.


      Attached is my workspace, does anyone have any ideas what could be the problem? I am programming with a MiniProg3.