At first thanks for you help.
I have can open port and erase, but checksum and program and verify, I still don't know how to do.
it use PSoC4 in the sample, I use KitProg/1C1A079B031F7400, so could you get me some help at this point?
This is too hard for me.
You will have to study the PSoC Programmer COM User Guide.
and use examples from the directory ... \ Cypress \ Programmer \ Examples \ Programming
as a reference code to configure Invoke Node
I saw both .vi and .cpp files in your attached. If you will use LabView, Cpp_Ex.pp is not required.
You can refer the example in Programming with KitProg2/MiniProg3 Using LabVIEW™ - KBA218796
It can working now, but I think there are have some different between CYCKIT059 and CYCKIT002 on RST, and different version software have some different.
I'm hesitant to switch to Cypress.