5 Replies Latest reply on Aug 6, 2018 2:35 AM by AbhinavG_21

    How to reset the usb port (which is connected to FX3) from the command line?




      I have one application which will write and read data from slavefifo. It is working fine and we dont see any issue. If we press ctrl + c it is exiting and if we try to connect execute the command (exe) it is not detecting the cypress device. I check with control center also and we see nothing connected to the pc. If we reconnect the USB and checked again. this time we can cypress device getting detected. Could you please let me know on how to solve this issue?



      Aswin kavali