1 Reply Latest reply on Jul 3, 2018 11:26 PM by SananyaM_56

    CY7C65213 driver code 10

      i have simple board with a CY7C65213-28PVXI chip on it

       

      driver / chip vid & pid changed from the defaults, driver re-signed properly

       

      board plugged into new PC via motherboard USB2 native port - device detected, driver installed when pointed at new files and the 2 devices ( MFG also ) appear as expected and all is happy.

       

      unplug the cable and plug it into a different port on the same machine and only the first end point enumerates but then sits there with a code 10 error message from the driver.  possibly correlating to being in a USB 3 port now

       

      this appears to happen on at least 2 different PCs

       

      any thoughts anyone?

       

      thanks

       

      Andy