1 2 Previous Next 17 Replies Latest reply on Jul 13, 2018 2:01 AM by bob.marlowe

    I'm using an I2C Master component (tried both fixed and UDB) when I2C_1_GENERATE_START_MANUAL is executed, the SCL line goes low and stays there (i.e. there is no clock). This happens for fixed and UDB.

    user_266614004

      I'm using an I2C Master component (tried both fixed and UDB) when I2C_1_GENERATE_START_MANUAL is executed, the SCL line goes low and stays there (i.e. there is no clock). This happens for fixed and UDB.

       

      Execution goes through all of the functions and returns with the clock line stuck at 0,

       

      Any ideas?

       

        Tnx.

       

          Jim B.

        1 2 Previous Next