1 Reply Latest reply on Jul 2, 2018 2:27 AM by abhinavg_21

    CX3 connected to HX3 connected via cable to PCIe card enumeration issues on power cycle/port swap

      I have four cameras connected to CX3 ICs that are then routed into an HX3 which is connected via a cable to a USB 3.1 Gen 2 PCIe card (HighPoint RocketU 1344A).  When I power cycle or swap ports with the cable the cameras don't enumerate.  This problem happens intermittently.  Do you have any suggestions on how to debug?