2 Replies Latest reply on Aug 18, 2018 9:40 PM by AxLi_1746341 Branched from an earlier discussion.

    Re: MCU powersave issues (con't)

    AxLi_1746341

      As a follow on to this thread that has become stale: Re: MCU powersave issues

       

      I don't get PeFe_666001 point. It's nothing to do with ble powersave.

      Did Cypress test the mcp_powersave.zip with freeRTOS build?

       

      BTW, I tried the changes he mentioned, it does not help.

       

      I got output like below:

      [08:47:47:779] Obtaining IPv4 address via DHCP␍␊

      [08:47:48:067] IPv4 Network ready IP: 192.168.1.101␍␊

      [08:47:48:470] Current time is: 2018-06-08T00:47:48.488000Z␍␊

      [08:47:48:475] Time: 2018-06-08T00:47:48.492000␍␊

      [08:48:49:140] <break>

      [08:48:49:140] <0xe0><0xe0><0xe0><0xe0><break>

      [08:48:49:151] <0xe0><0xe0><0xe0><0xe0><0xe0><0xe0><0xe0><0xe0><break>

      [08:48:49:151] <0xe0><break>

      [08:48:49:151] <0xe0><break>

      [08:48:49:151] <break>

      [08:48:49:151] <break>

      [08:48:49:151] <break>

      [08:48:49:151] <break>

      [08:48:49:151] <break>

      [08:48:49:151] <break>

      [08:48:49:151] <break>

      [08:48:49:151] <0xe0><break>

      [08:48:49:151] <break>

      [08:48:49:151] <break>

      [08:48:49:151] <break>

       

      Can someone on the applications team definitively confirm if MCU Powersave works?