2 Replies Latest reply on Jun 22, 2018 8:13 PM by Gyan Chand

    uART and Bluetooth central example

    user_488665997

      Mr. E. Pratt,

       

      Thanks for taking the time to answer my question.  I haven't had the time to try adding the uart_sleep and wake commands yet.  What I did was change the code to use the SW UART, and that is working.  I am now having problems with current draw through the SPI bus during PSOC deep sleep mode. If I disconnect the SPI MOSI and SClK, from PSOC to the slave, then the excess current goes away. So, I think I might try using the sleep and awake commands for the SPI to see if that helps. 

       

      Jeff

       

       

      Sent from my iPad