4 Replies Latest reply on Jun 22, 2018 4:48 AM by prsa_2711361

    Writing large data file to external SRAM


      I've been modifying the SRAM_FX3 example in order to write file to an external SRAM.  When I read the data back from the SRAM... the data seems to be repeating every 8192 bytes.  I was told to first read 8192 bytes and the write it to SRAM and repeat it again and again.  I'm new to this and am not entirely sure how to achieve this.

      I've attached my SM here.  I've not made any other changes to the firmware.


      Thank you.