3 Replies Latest reply on May 18, 2018 2:16 AM by yyca

    set feature

    15010160105_3057496

      Hello: When I create a UVC+HID compliant device, I encounter a problem. After the UVC and HID enumeration is completed, the host issues the SET FEATURE command (content: 01 03 00 00 02 01 00 00) when the host sends this. After the command, HID cannot send a report, but UVC works normally. If I start UVC and send a report to start HID before the host sends SET FEATURE, both UVC and HID are working properly. Why?