I have to switch to Cypress microcontrollers, but I do not know which one to direct me to.
I would need a microcontroller with 2 QEI, 4 SPI, 3 UART, 1 PWM and other meters.
I have to check a brushless motor, read one or two optical lines and read 3 adc.
which microcontroller can you recommend me?
Best would be to use a PSoC5 which has got the most flexible I/O. Most of your interfaces are implemented using UDB resources which are plenty in PSoC5. operating frequency is up to 80MHz and you can have DMA.