3 Replies Latest reply on May 2, 2018 1:46 PM by MarkA_91

    PSoC6 cm0+ and cm4 UART priority


      I have written code for UART and printing using both core CM0+ and CM4, its printing properly but I had doubt. Since both cores are transmitting using same UART block will there be any clash.

      Example: if suppose CM4 is transmitting and CM0+ also want to transmit at same time will there be any clash, and if there is clash how priority is resolved between CM0+ and CM4 or else I have to use IPC to check whether UART is free and done with transmission.