2 Replies Latest reply on May 24, 2018 11:41 AM by ga.elentech_1662311

    PSoC5 SPI interface with ethernet controller

    ga.elentech_1662311

      I have developed a board using a CY8C5488AXI-LP120 psoc. I have an SPI host module set up in it to interface with a Micrel (now Microchip)

       

      KSZ8851SNL Ethernet controller IC (which includes MAC and PHY layer functionality). At this time I only have to verify that the hardware is working. A full TCP/IP stack development will come later on. For the hardware test I believe that I only would need to return a ping packet initiated from a local network computer. Does anyone have experience with this Ethernet controller that can suggest how to set up the SPI for communication compatibility?