- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello All
Anybody experience with the following:
FPGA with HDMI IP core <=> interface (drivers and USB-C PD control <=> USB-C connector?
regards
Ron Proveniers
Solved! Go to Solution.
- Tags:
- hdmi source
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ron,
Cypress only have Type-C connector + Type-C power delivery control solution, you could kindly refer to it.
EZ-PD™ CCG3 USB Type-C to HDMI Adapter Solution
EZ-PD™ CCG3 based HDMI over Type-C Cable Reference Design
Best Regards,
Lisa
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ron,
Cypress only have Type-C connector + Type-C power delivery control solution, you could kindly refer to it.
EZ-PD™ CCG3 USB Type-C to HDMI Adapter Solution
EZ-PD™ CCG3 based HDMI over Type-C Cable Reference Design
Best Regards,
Lisa
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks Lisz,
I have looked at the possibilities but with the CCG3 i also have to control a TUSB1046 switch via I2C.
Are there any examples how to control this TI USB switch??? does the standard firmware do this or do i have to adapt the PSOC firmware myself?
thanks
Ron
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ron,
We do not have example for controlling TI USB switch, but I think the I2C control is easy to implement. Since Our firmware example on CYPD3123 have I2C control for PS8740. You could take a look and refer to.
Please kindly find the correct FAE for your Regional from the LINK: Cypress Franchised Distributors
Best Regards,
Lisa
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks Lisz,
Do you have a link to ":
"the I2C control is easy to implement. Since Our firmware example on CYPD3123 have I2C control for PS8740. You could take a look and refer to."
i could not locate it on Cypress website?
thanks
Ron
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ron,
If you have chance to install CCGx SDK, you could find out CYPD3123 example firmware. Download link: http://www.cypress.com/documentation/software-and-drivers/ez-pd-software-development-kit?source=sear...
Best Regards,
Lisa
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hallo Lisz,
Who is the local representive or FAE in the Netherlands??
thanks
Ron