- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear sir,
I am working with FM25V02A (EEPROM ) with tms320f28335 microcontroller .Is any sample code is available plz send me.
Message was edited by: Joshi Maahesh
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Maahesh,
We have some example code for FRAMs with PSoC 4 and PSoC 3. You can go through them and get an idea so that you can compose one for your microcontroller.
http://www.cypress.com/file/46161/download
http://www.cypress.com/file/46256/download
Thanks,
Pradipta.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Maahesh,
We have some example code for FRAMs with PSoC 4 and PSoC 3. You can go through them and get an idea so that you can compose one for your microcontroller.
http://www.cypress.com/file/46161/download
http://www.cypress.com/file/46256/download
Thanks,
Pradipta.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear sir ,
thanks for ur reply. please can able to tell me write protection is used in our FRAM-25v02A.
1.why used write protection (WP)?
2.what is necessity of write protection (WP)?
3.why write protection (WP) provided?,if I am not used it what problems will come?
please explin in brief:
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Maheesh,
The Write protect feature is used to prevent any inadvertent write to the memory (FRAM). If the control signals to the FRAM is not applied properly then there is a possibility of data corruption( Say WE and CE are low and you did not intend for that to happen. So it can initiate a write operation).
On details of how to use it you can refer to the datasheet itself on page 7 which explains the complete features.
If you do not want to use the write protect feature you can just connect the WP pin to VDD. There are no side effects of not not using this feature. So you will not observe any problems.
Thanks,
Pradipta.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
How do I erase an EEPROM and is it necessary to do it.please explain the procedure.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Maahesh,
The part we are discussing about is a FRAM part and not an EEPROM. FRAMs cannot be erased. You will simply have to overwrite the data in the FRAM with new data if you want to remove the previous data.
Thanks,
Pradipta.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear sir,
thanks for your reply.In FRAM --we wcanot erase memory .If I used any EEPROM ,plz give ur valuable suggestion how I erase the EEPEOM?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear sir,
Thank u sir