Can you explain how you check the output of temperature and humidity sensor?
Thank you very much for your reply !
I tested the temperature under desk lamp at room temperature (~28C) and it
was reading -46C.
When I do not allow the light to reach the solar cell, the reading stops.
(So I assume communication is working properly)
Next, I took them to fridge to see if the temperature increases or
decreases. But it was still reading -46C.
I would really appreciate your help.
On Tue, Apr 17, 2018 at 12:19 AM, yuva <firstname.lastname@example.org>
How do you observe the changes on the temperature and humidity sensor, do you follow the steps in section 4.2 in kit guide. What application in iOS or Android is used? Can you check with the alternative application? The issue could be due to temperature and humidity sensor not working or some type of communication issue. Also ensure the output of the Buck converter (MB39C811) is at stable voltage.