Which version of PSoC Creator you used? Possible to attach your project here?
I'm using PSoC Creator 4.2 (188.8.131.521). Can't add the project but if you drop the ADC component in any project, I think you'll see the same thing.
Thanks for testing this. So I did change the configuration from differential to single-ended.
Is this issue resolved? If not can you also let us know the pins you used for the SARMUX connection, it appears like your configuration is not using the SARMUX and with the settings in your image, I do not see any warning in the project.
Meenakshi Sundaram R
I am having the same issue with "Warning: placer did not place the following components: \ADC:SARMUX\:SARMUX" on a PSOC6 CY8C6347BZI-BLD43 on Kit 062.
I cannot post the project, but I am using 6 single ended inputs, Connected to Port 10 Pins 0-5. It is set for Unsigned in both formats, 8 samples averaged, Sequential Fixed Avg mode used in single shot mode.
All documentation I have been able to find indicates it is a "legal" setup in terms of the component and the ports the ADC/Mux is assigned to.
I am using PSoC Creator 4.2 (184.108.40.2061)
Any help will be appreciated
I'm getting the same warning. Has this issue been resolved?
From what I received back, the SARMUX is not placed, it is configured when you activate it in your application via the PDL code.
Thank you, Chris.