1 Reply Latest reply on Mar 15, 2018 5:00 AM by shreyas.ravindra_2642471

    Bonding Issue :Unauthenticated Pairing with Encryption doesn't work

    shreyas.ravindra_2642471

      Hi I have a problem with bonding issue. I have created a BLE device with following configuration

      img1.JPG

      Now the device I am implementing doesn't have input and output to perform authentication. As a result when I go for secure connection, I chose pairing as Unauthenticated Pairing with Encryption

      img2.JPG

      Now I am trying to pair it with LightBlue Application running on my Mobile phone. So I see that the connection to my BLE device happens successfully. However there is no Bonding that happens although I have enabled bonding in the configuration. Also I am not even getting CYBLE_EVT_GAP_ENCRYPT_CHANGE event. I am not sure if there is something I am missing in the configuration. For your information I am attaching my stack handler code as well.

       

      Please let me know what I am doing in correct out here. I had a look at the PSoC 100 projects in 100 days as well PSoC-4-BLE/100_Projects_in_100_Days at master · cypresssemiconductorco/PSoC-4-BLE · GitHub but couldn't find too much information regarding my problem. I am not sure what am I doing incorrect.

       

      Best Regards,
      Shrey