1 Reply Latest reply on Mar 15, 2018 12:54 AM by rzzh

    Raw count


      Hi all,


      I use cy8cmbr3110 in my project. It must operate in dry and moist environments and in some cases with water in the electrodes. in this case, is it reliable to use the raw count parameter to read the electrodes? The raw count vary in different environments?

        • 1. Re: Raw count

          The scanning's raw-counts reflect Cx changing between the sensor and GND.

          Theoretically,  as long as the capacitance value between the sensor and GND changes, rawcount can vary it out. The problem is SNR.

          Suggest to do some experiments to watch the rawcounts' changing traces and characteristic in your application, then decide if it can work.