2 Replies Latest reply on Mar 9, 2018 1:31 AM by lisz

    Need default Monitor side *.cypd and xml file available for CCG1 kit

    ArunKS

      On Client side of CCG1 kit I am unable to read device detail from EZPD Configuration tool, after connection if i read device below error is seen.

       

      Configuration read over I2C interface succeeded

      Error: Configuration table signature is not valid

       

      Let me know,Do i need to flash the firmware. Where can i find default firmware for CCG1 kit or I can we use default configuration table and restore data back. Pl let me know the procedure so that, I can able to read back the device detail about PDO...SVID.. on client side.

       

      Tool shows below info on client side.

       

      CYPD1121-40LQX1

      Monitor

      Firmware Base: 1.0.0.329

      APP:0.1

       

      Thank you,