1 Reply Latest reply on Jan 23, 2018 9:03 PM by hjpn

    LIN protocol Stand by mode operation:

    vyshakh.j_3074361

      Hi All,

                       It will be grateful if you can help me with a clear understanding of LIN stand by mode operation. As per my understanding, Bus Idle situation happens(no LIN traffic for 4-10seconds), or go-to sleep command received from master, the LIN PHY will go for stand-by mode.

      Please help me with the state of LIN PHY, for the below mentioned scenario,

      a) The ECU is powered up and there is no LIN traffic for 4-10seconds after powering up the ECU, what will be state of LIN PHY?   : Normal mode or Standby mode

       

      b) The ECU is powered up, and at least one LIN frame is transmitted through the bus, and there is no traffic for 4-10seconds,  what will be state of LIN PHY? : Normal mode or Standby mode

       

       

      Hope you got the difference between scenario a and b.

       

       

      Thanks ,

      Vyshakh J