If i run FX3,FLAGA is going 1 to 0 and stays 0 forever
FLAG B is going low to high when i request the data from the control centre.
FLAG B is changing ,but FLAG A is not changing??why??
and data is missing in the control centre.
I set CyU3PGpifSocketConfigure (0,CY_U3P_PIB_SOCKET_0,3,CyFalse,1);
as per AN65974 app note(EXAMPLE 3,FIGURE 13),
Before running FPGAi am running FX3,
What are the other changes you did to your statemachine and the firmware? Can you please attach those here?
- Madhu Sudhan