2 Replies Latest reply on Dec 21, 2017 2:00 AM by himam_31

Bootloader host problem "command not recognized"

jodi_1595251 Dec 19, 2017 8:07 AM

Hi, I'm using PSoC 5LP CY8CKIT-059 and I have a problem with the bootloader host programm. I'm trying to test my I2C Bootloader with a bootable blinking LED project. When I try to program the cyacd. file I get the message "The bootloader reported error 'Command not recognized". I am a beginner and this is my first project.

Thanks for your help.

I2C_Bootloader.cywrk.Archive01.zip 3.0 MB

1. Re: Bootloader host problem "command not recognized"

AnkitaS_51 Dec 20, 2017 8:35 PM (in response to jodi_1595251)

Please refer this Application Note.It will be useful-
http://www.cypress.com/documentation/application-notes/an60317-psoc-3-and-psoc-5lp-i2c-bootloader
Like Show 0 Likes(0)

Actions
2. Re: Bootloader host problem "command not recognized"

himam_31 Dec 21, 2017 2:00 AM (in response to AnkitaS_51)

Kindly check if the data rate is correctly set in the Bootloader Host and Bootloader. Check the AN mentioned in the previous response.

Thanks,
Hima
Like Show 0 Likes(0)

Actions

Go to original post