2 Replies Latest reply on Dec 20, 2017 10:32 AM by christian.thiele_1636056

    Follower-output voltage breakdown?

    christian.thiele_1636056

      Hello,

       

      I have five 10k-ntc, each with 10k reference-resistor. For voltage-reference i use an op-amp-component as follower and vref-component at 1024 mV.

      In this configuration, my Output-voltage breaks down to 560 mV. The load-current is about 90 uA. If I am right, the op-amp-component should give up to 25 mA.

      Has anyone experienced the same issue?