1 of 1 people found this helpful
The motion sensor being used on the shield board is from Bosch, the BMI160. You can find the BOM for this shield board and other related kit files in the kit installer directory (usually C:\Program Files (x86)\Cypress\CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit).
For the example project, apologies for the delay. We are targeting early Q1 of next year for the example project release.
But in the meantime, you can interface with the BMI160 via I2C or SPI, using the Serial Communication Blocks (SCBs) provided in the PSoC 6 architecture.
Let me know if you have other questions or feedback.
Thanks for the info including the pointer to the BOM & schematic of the CY8CKIT-028-EPD shield.
I've previously used the BNO055 absolute orientation sensor (which includes a Cortex M0+ for sensor fusion) together with an Arduino Nano. I'll probably start out by using the BMI160 with the E-ink shield on a 3.3V Arduino UNO since there already appear to be a number of Arduino libraries available for the BMI160. Presumably I will wait until your example project is available instead of porting the Arduino library to the M0+ in the PSoC 63 myself.
Using the shield on an UNO may perhaps also help figure out what the problem is that I'm experiencing with the E-ink display (-> https://community.cypress.com/thread/31993).