Have you been referred to the CY8CKIT 037 PSoC 4 Motor Control Evaluation Kit Guide.pdf when operating the kit?
Specifically, Ensure that the other end of the USB cable is connected to the PC in this step; otherwise, the motor will not start rotating. Press the SW2 button to start motor rotation (refer to Figure 5-14). If the motor does not rotate and you observe LED2 blinking, an error has occurred. If so, first check that step 1 through step 5 have executed correctly. Then press the Reset button and press the SW2 button again. If LED2 still blinks, there must be a problem in the hardware or software.