1 Reply Latest reply on Nov 26, 2017 10:33 PM by vsrs

    SARMUX Specification

    user_418894472

      Hi!

      Where can I find the specification for the SARMUX and analog multiplexer inside the PSOC-4M devices. I mainly want to know the input and output leakage current of the SARMUX and analog multiplexer? My signals come from a high impedance source and sample time is in order of milliseconds. The leakage current of the multiplexer will cause a drift in the signal voltage. I want to know the value of the leakage current.

       

      Thank you.

        • 1. Re: SARMUX Specification
          vsrs

          Hi Mrinal,

           

          The leakage current of the GPIO pins and CTB pins are specified in the datasheet. In case you wan to know resistance of the path you are using you can use the ohm meter component in creator. Please go to CYDWR -> Analog -> right click on the GPIO -> Select ohm meter.

           

          Best Regards,
          VSRS