Programming PSoC 4 via UART of EPS8266

Anonymous · ‎Nov 23, 2017

Hello!

So I'm in my first year of messing around with a PSoC and have gotten the CY8KIT-042 pioneer kit.

As project I'm trying to get the PSoC the be programmed by the ESP.

I've gotten it to work so it would flash over USB but I honestly have no idea on how to start this project with the ESP.

Any help? Thanks in advance ^.^

Vasanth · ‎Nov 26, 2017

Hi,

Best Regards,
Vasanth R S

EvPa_264126 · ‎Nov 23, 2017

If CY8KIT-042 is connected - you will see KitProg USB-UART (COMxx) in Device Manager.

This means that you have a COM port on the J8 connector.

Tx: PSoC 5LP P12 [7] (on J8)

Rx: PSoC 5LP P12 [6] (on J8)

eg:

Anonymous · ‎Dec 06, 2017

Yes I got this to work so that I can flash the board via USB but now I wanna try to get it so it flashes trough the ESP8266 is this possible?

Vasanth · ‎Nov 26, 2017

Hi,

Best Regards,
Vasanth R S

Re: Programming PSoC 4 via UART of EPS8266