- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
in BCM20737IBCN_REF_SCHEMATIC, P0 pin is function to disable radio function of BCM20737 .
but P0 pin does't have as above content if you see part of P0 alternative function description.
i want that it would be possible to on/off BCM20736 from another master device.
Solved! Go to Solution.
- Labels:
-
BTWi-Fi Bridging
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm not aware of a GPIO or Function that disables RF or turns off the BCM2073X family.
I know that if the application turns off all advertisements, scans and connections, the RF hardware block on the device will not transmit/receive anything, but not a definitive on/off function.
This is discussed partially here: Best way to disable radio?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm not aware of a GPIO or Function that disables RF or turns off the BCM2073X family.
I know that if the application turns off all advertisements, scans and connections, the RF hardware block on the device will not transmit/receive anything, but not a definitive on/off function.
This is discussed partially here: Best way to disable radio?