2 Replies Latest reply on Nov 7, 2017 11:15 PM by yamakoshi.to_1469256

Terminal processing of S25FL256L

yamakoshi.to_1469256 Nov 7, 2017 9:39 PM

Q1: WP # terminal

If Quad command or Write protection is not used in the host system, the WP# pin can be left open, but is there a problem with using the WP# pin fixed at VDD (3.3 V)?

Q2: RESET # terminal

If Quad command or Reset is not used in the host system, the RESET# pin can be left open, but is there a problem with using the RESET# pin fixed at VDD (3.3 V)?

1. Re: Terminal processing of S25FL256L

krishnag_71 Nov 7, 2017 10:29 PM (in response to yamakoshi.to_1469256)

Hello Yamakoshi San,

You can connect WP# and RESET# pin to VDD (3.3V) . There will not be any problem as long as you are not going to use those pins.

Thanks,
Krishna.
Like Show 0 Likes(0)

Actions
2. Re: Terminal processing of S25FL256L

yamakoshi.to_1469256 Nov 7, 2017 11:15 PM (in response to yamakoshi.to_1469256)

Hello Krishna San,
Thanks for your reply.
Like Show 0 Likes(0)

Actions

Go to original post