11 Replies Latest reply on Oct 30, 2017 7:44 PM by joseph.m.graham_2248906

    PSOC 4 ADC SAR Seq reading off

    joseph.m.graham_2248906

      I have a custom hardware setup that is reading a current sensor and a pressure sensor. If I read the ADC input with a multimeter I see 2.5V from both sensors but in code the ADC is returning 3.085V and 2.984.

       

      I've attached my code. I'm running a very simple Fake RTOS to sample the sensor and print info out to the UART.

       

      Do you guys see anything wrong with the setup?

       

      Joe