Product type: S6E2H1 series
Please tell me about multifunction timer
DTTI input Please tell me the pulse width that can be eliminated with the analog noise filter.
32-bit microcontroller FM 4 family peripheral manual The description of the timer part is as follows
Whether the system to be input to analog noise filter from the DTTIX pin is enabled or disabled is selected by the NZCL:DTIEB register. If a Low-level pulse no less than the value specified by the analog noise filter is input, the WFIR:DTIFB register is set.
The maximum pulse width which can be eliminated by the analog noise filter is 10nSec