1 Reply Latest reply on Oct 11, 2017 2:19 AM by hima

    CY8CKIT-042-BLE I2C connections

    AkshayIngle1

      Hi

       

      I am trying to interface a FRDM-STBC-AGM01 sensor board to the above mentioned kit,

       

      Is there I2C available on the CY8CKIT-042-BLE board which can be used for interfacing external I2C devices, if yes then what is i2c bridge? does it pose any conflict?

       

      Can I use UART, (using UART- USB bridge)  at the same time while using I2C.   

       

      Thanks

        • 1. Re: CY8CKIT-042-BLE I2C connections
          hima

          Hello,

           

          There is no specific pins compatible for the FRDM-STBC-AGM01 module as such. However for interfacing I2C module with PSoC4-BLE you can use any of the pins assigned by Creator.

          You can use the USB-UART bridge in the kitprog same time as the USB-I2C bridge.

           

          If your question is to have the kit acting like a USB I2C bridge then you will need to directly connect the I2C pins to P12.0 (SCL) and P12.1 (SDA) of the PSoC5LP in the kit.

           

          Thanks,

          Hima