4 Replies Latest reply on Jun 15, 2015 12:17 PM by hmoore

    WPS registrar does not work in SDK3.1.1

    alex.damosys_1740326

      SDK 3.1.1   WPS test

       

      1. WPS trgistrar does not work with SmartPhone (Samsung Galexy S4 )

      2. WICED SDK project :  snip.wps_registrar-BCM94390WCD2-ThreadX-NetX NO_BUILD_BOOTLOADER=1 download run

      3. Serial console log says that  "WPS enrollment was successful". so 4390 module output "WPS enrollment was successful"

          but smartphone can not get the ip address.  In smartphone, "WPS complete, get networking......" and says "WPS fails"

      4. it seems to work in console in module side, but module side, DHCP server may not work properly

          please refer below information

      .wps_registrar_error.png

      //   serial terminal log ----------------------------------------------------------------------------------------------------

      Starting WICED v3.1.1

      Platform BCM94390WCD2 initialised

      Started ThreadX v5.6

      Initialising NetX v5.5_sp1

      Creating Packet pools

       

      Starting WICED v3.1.1

      Platform BCM94390WCD2 initialised

      Started ThreadX v5.6

      Initialising NetX v5.5_sp1

      Creating Packet pools

      WWD SoC/4390 interface initialised

      WLAN MAC Address : 02:0A:F7:67:36:42

       

      WLAN Firmware    : wl0: Sep 23 2014 15:25:17 version 6.38.15.5 (r504179)

       

       

      Starting access point

       

       

      IPv4 network ready IP: 192.168.10.1

      Starting WPS Registrar in PBC mode

       

       

      WPS enrollment was successful

       

      TKS