1 Reply Latest reply on Nov 7, 2017 6:55 PM by inoue_tomohiro_1742091

    Murata 1DX's BLE PER test

    hitesh.gambhava

      Hi,

       

      I have designed product on i.MX6UL platform with Murata's 1DX for WiFi and BLE interface. Right now we are in certification phase and our test lab is looking for BLE's PER (packet error rate) data for Rx blocking test.

       

      I have tried with keeping one unit in continues Tx mode and one unit in Rx mode with HCI tool. I am getting data at Receiver side but not getting packet details i.e. how many transmitted and how many received.

       

      Please, somebody, help me to get this data.

       

      Thanks !

        • 1. Re: Murata 1DX's BLE PER test
          inoue_tomohiro_1742091

          I think you are not using BLE Testing Equipment, but you are using actual product you developed both for TX side and RX side. As you can see in the Core Spec, Number_Of_Packets for a transmitter test shall be reported as 0x0000. So you are doing right. In order to know PER, you need to use BLE Testing Equipment so that you can know how many packets are transmitted.