2 Replies Latest reply on Aug 23, 2017 12:43 AM by vdelueg_2607646

    GPIF II example for linear image sensor

    vdelueg_2607646

      I would like to use the FX3 to control an Image scanner.

      That involves controlling of  stepper motors, creating clock signals for linear Image sensor and AD converter, reading raw data, sending USB-data to host.

      Is there any design example which I could use as a reference?

        • 1. Re: GPIF II example for linear image sensor
          maheswariamudha_2545856

          To interface image sensor and  send data to host  you can refer the

          application note:

           

          AN75779 - How to Implement an Image Sensor Interface Using EZ-USB® FX3™ in

          a USB Video Class (UVC) Framework

           

           

          Controlling of  stepper motors:

           

          The FX3 device has eight complex GPIO blocks that can be used to implement

          various functions such as timer, counter and PWM. You can refer the example

          code to interface the motor. Follow the path C:\Program Files

          (x86)\Cypress\EZ-USB FX3

          SDK\1.3\firmware\serialif_examples\cyfxgpiocomplexapp

           

          On Wed, Aug 23, 2017 at 11:39 AM, vdelueg_2607646 <

          1 of 1 people found this helpful
          • 2. Re: GPIF II example for linear image sensor
            vdelueg_2607646

            Thank you for the answer.

            Unfortunately the UVC example is not really usable, since the timing of an area Image sensor is quite different to a linear Image sensor (CCD or CIS). I hoped there would be something closer to my needs...