The table shows an SPI configured as SPI slave which can be woken by a select line from deep sleep.
Can you please post your complete project or a shortened version that shows the error so that we all can have a look at all of your settings. To do so, use
Creator->File->Create Workspace Bundle (minimal)
and attach the resulting file.
Therefore, we can't assign those pins( stated on Deep sleep columns) as normal SPI function pins?
Actually, we are trying to migrate from CY8C4125LQI-483 to CY8C4125LQI-S433 in our project.
However, the pin assignments seem not 100% compatible.
We can't choose the exactly the same SPI pin number.
The attached is reduced design files which can build successfully using CY8C4125LQI-483.
But if you change the MCU to CY8C4125LQI-S433, you will see the errors.
The SPI pins are P4.0 to P4.3 which we do want to change as the PCB layout is completed.
Workspace02.cywrk.Archive01.zip 774.1 K
The PSoC 4100 S family differs a lot from the "normal" 4100 and would require a different layout. What is the main reason to change to the S-family?
I also don't know. It's not my call actually.
Anyway, thanks for your reply.