3 Replies Latest reply on Nov 6, 2014 10:07 AM by soorajrk

    Using STM32F4DIS-WIFI with WICED SDK (OSX)

    bobmorane

      Hi all,

       

      I'am trying to use the WICED SDK 3.1.1 (OSX) with my STM32F4DIS-WIFI.

      Eclipse and compilation is running OK. OpenOCD is also OK.

      It seems however that the SN8200 used in this module is based on STM32F1x.

       

      OpenOCD report :

      Polling target stm32f2xxx.cpu failed, GDB will be halted. Polling again in 100ms

      Info : JTAG tap: stm32f2xxx.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3)

      Warn : JTAG tap: stm32f2xxx.cpu       UNEXPECTED: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3)

      Error: JTAG tap: stm32f2xxx.cpu  expected 1 of 1: 0x4ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x4)

      Info : JTAG tap: stm32f2xxx.bs tap/device found: 0x06430041 (mfg: 0x020, part: 0x6430, ver: 0x0)

      Warn : JTAG tap: stm32f2xxx.bs       UNEXPECTED: 0x06430041 (mfg: 0x020, part: 0x6430, ver: 0x0)

      Error: JTAG tap: stm32f2xxx.bs  expected 1 of 1: 0x06411041 (mfg: 0x020, part: 0x6411, ver: 0x0)

       

      CPUTAPID : 0x3ba00477 seems to identify F1x series

       

      Every platforms definition in SDK tree are for F2x or F4x. Is there any configuration files for this module/CPU ?

       

      Thanks,

      BR,

      Vince.