4 Replies Latest reply on Jan 13, 2015 4:24 PM by user_343349849

    Very slow Debug

    user_343349849

       I have an issue in one project only where there are extensive debugging delays.

         

      Each time I stop at a break point and click to RUN, it takes around 10 seconds before program runs (status remains on "Halted" for around 10 seconds. When I break, it can take 4 or 5 seconds to update the variable watch list.

         

      I have only noticed this behaviour on this project. Up until a couple of days ago, it was working fine (like the other projects). Usually, the debugger starts almost immediately I press run. I have tried 2 different Mini-Prog 3 and same result on both.

         

      The protocol is set to JTAG, 4MHz Clock, External power and I an using XRES same as other projects.

         

      As I say, this was working nirmally on this same project until a day or 2 ago.